Money Back
15 days money back guarantee.
Secure Checkout
We ensure 100% Payment Secure.
The wiring in the machine harness has failed.
The driven component in the circuit has failed.
The ECM has failed. This is unlikely.Test Step 1. CHECK THE WIRING HARNESS.
Disconnect the wiring harness connector from the MSS ECM.
Measure the resistance between pin 18 in the wiring harness and a ground on the machine.Expected Result:The resistance is greater than 5000 Ohms.Results:
YES - The resistance is greater than 5000 Ohms (no continuity). Harness circuit resistance is correct. Proceed to Test Step 3.
NO - Resistance is less than 5000 Ohms (continuity). The machine harness is faulty. There is a short between frame ground and the machine harness. The driven component in the circuit may also be bad. Proceed to Test Step 2.Test Step 2. CHECK THE COMPONENT.
Trace the harness to the driven component in the circuit. The component will be a relay. The component may also be a solenoid.
Measure the resistance of the component. Measure the resistance from each terminal to the case of the component.Expected Result:The resistance is greater than 5000 Ohms.Results:
YES - The resistance of the driven component is greater than 5000 Ohms (no continuity). The component is good. The machine harness has failed. There is a short between frame ground and the machine harness.Repair: Check the harness for signs of damage. Repair the machine harness or replace the machine harness. Stop.
NO - Resistance is less than 5000 Ohms (continuity). The driven component has failed. Repair: Replace the component that has failed. Stop.Test Step 3. CHECK IF THE DIAGNOSTIC CODE IS STILL ACTIVE.
Remove the connector from the ECM. Inspect the contacts and clean the contacts of the harness connectors.
Reconnect all harness connectors.
Turn the key start switch to the ON position.
Clear all inactive diagnostic codes.
Operate the machine.
Determine if CID 1392 FMI 04 is present.Expected Result:CID 1392 FMI 04 is present.Results:
YES - CID 1392 FMI 04 is present.Repair: The problem has not been corrected. It is unlikely that the ECM has failed. Perform the previous Steps again. If the cause of the diagnostic code is not found, replace the ECM. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace". Stop.
NO - CID 1392 FMI 04 is not present.Repair: The diagnostic code is NOT present. The problem does not exist at this time. The initial problem was probably caused by an intermittent short in the wiring harness. Inspect the harness for any signs of damage. If the harness passes through a hole with a grommet, that area of the harness can become chafed. This may cause an intermittent short. The harness may also be damaged in locations that could pinch the harness. Repair any wiring that could have caused the problem. Resume normal machine operation. Stop.
Cat SIS web mach
Last updated: March 8, 2025
At APSS, we are committed to delivering your orders efficiently and securely. We partner with leading international carriers, including FedEx, USPS, and DHL, to ensure fast and reliable shipping from Singapore to various countries worldwide.
Processing & Shipping Times
- Orders are processed within 1-3 business days after payment confirmation.
- Standard international shipping times vary based on the destination:
- Asia-Pacific: 3-7 business days
- Europe & North America: 5-10 business days
- Other Regions: 7-14 business days
- Expedited shipping options are available at checkout for select regions.
Shipping Carriers
We work with trusted carriers to ensure safe and timely delivery of your orders:
- FedEx – Express international shipping with tracking.
- USPS – Cost-effective shipping to the United States.
- DHL – Fast global delivery with premium service.
Tracking details will be provided once your order has been shipped.
Shipping Costs & Duties
- Shipping fees are calculated at checkout based on destination and package weight.
- International orders may be subject to customs duties and taxes. These charges are the responsibility of the recipient and vary by country.
- APSS is not liable for any delays caused by customs processing.
Order Tracking
Once your order has been shipped, you will receive a tracking number via email. You can track your shipment using the respective carrier’s website:
Lost or Delayed Shipments
If your order is delayed beyond the estimated delivery time, please contact our customer support at procurement@apss.com. We will work with the carrier to resolve any issues.
For lost shipments, please notify us within 15 days of the expected delivery date so we can investigate and assist with a resolution.
Address Accuracy & Changes
- Please ensure that your shipping address is correct before completing your purchase.
- Address changes cannot be made once the order has been shipped.
- APSS is not responsible for orders shipped to incorrect addresses provided by the customer.
Contact Us
For any shipping-related inquiries, please reach out to us at:
APSS Headquarters
3 Gambas Crescent, #06-10 Nordcom I, Singapore 757088
Email: procurement@apss.com