Fandis IGR35F
Hygrostat Switch – Humidity Control for Electrical Enclosures
Fandis mechanical hygrostat switches on electrical enclosure heating or cooling units when a preset relative humidity (RH) is exceeded. The relative humidity is kept above the dew point and the condensation of water on electrical components and the corrosion of unprotected sheet metal is prevented.
Electrical Data
| Appliance Class | II |
|---|---|
| Rated Current | 10-5 A |
| Rated Voltage | 120-240 V a.c. |
Environmental and Thermal Data
| IP Protection Degree | IP20 |
|---|---|
| Operating Temperature | 10÷60 °C |
| Storage Temperature | -40÷60 °C |
Generic Data
| Accuracy | ± 5 % RH |
|---|---|
| Casing Material | PC/ABS UL94 V-0 |
| Contact Type | Change Over |
| Electrical Connection | Terminal Block |
| Fixing System | DIN rail |
| Life Expectancy | 30000 Cycles |
| RAL Number | 7035 |
| Rated Hysteresis | 5 % RH |
| Sensor Type | Polyamide Ribbon |
| Setting Range | 10-90 % RH |
| Setting Resolution | 5 % RH |
| Wires Section | 1.5-4 mm² |
| Wires Section | 14-12 AWG |
UL Data
| UL Ambient Temperature | 40 °C |
|---|---|
| UL Environmental Type Rating | Open Type |
| UL File Number Recognized Component | E247491 |
