Mechanical data
| Mechanical life, minimum |
1,000,000 Operations |
| Actuating play in direction of actuation |
5.5 mm |
| Impact energy, maximum |
1 J |
| Energy impact (protective case), maximum |
7 J |
| Holding force FZh in accordance with EN ISO 14119 |
2,000 N |
| Holding force Fmax, maximum |
2,600 N |
| Latching force |
30 N |
| Positive break travel |
10 mm |
| Positive break force per NC contact, minimum |
10 N |
| Actuating speed, maximum |
1 m/s |
| Mounting |
Screws |
| Type of the fixing screws |
3x M6 |
| Type of the screw head |
Flat head screw |
| Tightening torque of the fastening screws for the housing cover |
0.6 Nm |
| Note |
The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab. |
| Tightening torque of the cable gland |
3 Nm |
| Length |
30 mm |
| Width |
130 mm |
| Height |
90 mm |
| Degree of protection |
IP67 |
| Ambient temperature |
-10 ... +50 °C |
| Note (Relative humidity) |
non-condensing non-icing |
| Thermal test current |
6 A |
| Rated control voltage |
24 VAC |
| Rated control voltage |
24 VDC |
| Required rated short-circuit current |
1,000 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
2.5 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
NO contact, NC contact |
| Switching principle |
slow action, positive break NC contact |
| Maximale Schalthäufigkeit |
1,000 /h |
| Material of the contacts, electrical |
Silver |
